Name：P-Optic Fiber Cleaner
Details
P-type Fiber Cleaner
 |
P-type Fiber Cleaner is designed by Wuhan cleanet to meet the demand of critically cleaning in fiber connector and optical module manufacture on a large scale.
The distinguishing characteristic is high quality of cleaning .high efficiency, extremely low cost. |
|
Product Picture |
Descriptions |
 |
Adopted modern design and patent material and special fiber of super clean, slot-board can be changed according to demand it is designed to be suitable for all the kind of optical fiber connector and photoelectric parts manufacture 。
Specification
●Shell material: duralumin/ stainless steel
●Cleaning material:Class-100 superfine fiber
●Number of Cleaning times :
200 times/piece(100times/side,both of sides can be used)
●Cleaning effect: -20~-50dB(return loss)
●Product weight:500g
●Size: 155mm (Width) X 155mm (Length) X 10mm (Thickness)
*Cleaning material can be changed. |
 | |
 |
Structure characteristic
●Base: duralumin material
●Cover: stainless steel, dustproof
●Rubber cushion :cover fiber connector to damage
●Slot board: duralumin material(it can be changed according to requirement of customer)
●Cleaning cloth:Class-100 superfine fiber .both sides are available. |
 | |
 |
Instruction
●Unclose the cover ,install the cleaning cloth and slot board on cleaner ,close the cover
●Slide the cover, reveal the cleaning slot ,putt fiber connector in the slot to scrape slightly
●Both of the cleaning cloth can be use .While A side used out .remove the plastic film of B side, install B side up-turned in the cleaner.
●Both of A and B used out ,new cleaning cloth should be changed. |
 | |
 |
Slide cover
●Slide to reveal it slightly by hand
●Remove the plastic film
●While use A side. B side covered by plastic film to avoid contaminated
●After A side is used out , to use B side, plastic film of B side must be removed |